Find a Service Center
- Pressure Control Valve
- Pressure Relief Valve Type
- RV1-10 Series
- Cartridge Only Port Size
- Direct Acting Operation
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Body Type | 1 |
| Flow [Max] | 8 gal/min |
| Adjustment Type | Factory Set |
| Pressure Setting | 700 psi |
| Series | RV1-10 |
| Type | Pressure Relief Valve |
| Housing Material | Cartridge Only |
| Cracking Pressure [Max] | 900 psi |
| Pressure [Max] | 3000 psi |
| Seal Kit Viton | 566086 |
| Cracking Pressure [Min] | 100 psi |
| Port Size | Cartridge Only |
| Seal Material | Buna-N |
| Operation | Direct Acting |
| Cavity | C-10-2 |
| Manufacturer Part No. | RV1-10-F-0-9/7 |
| Model No. | RV1-10-F-0-9/7 |
| Seal Kit Buna | 565803 |
| Weight | 0.48 LB |
