These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Spool Indicator Switch Code
None
Reducer Module
N/A
EN Code
None
Solenoid
Double
Pressure [Max]
5075 psi
Mechanical Options
None
Crossover
All Ports Blocked
Spool Shift Timing
N/A
Voltage & Frequency
12 VDC
Pilot Valve Type
N/A
Center Position
All Ports Blocked
Function Code
2
Electrical Connection
No Connector
Coil Type Code
SP2
Coil Type
Dual 6.3 mm Spade
Indicator Lights
No
Cycle Rate [Max]
N/A
Design No.
60
Actuator Type
Solenoid
Overrides
No Overrides
Seal Material
Buna-N
Surge Suppressor/Damper
None
Manual Override Option Code
None
Solenoid Code
G
Electrical Connector Code
None
Response Type
Standard Response
Spool Spring Arrangement Code
C
NFPA Size
D03
Rated Flow [Max]
21 gal/min
Pressure Port Check Valve Pressure
N/A
Spool Code
2
Pilot/Drain
None
Coil Rating Code
G
Function
3-Position Spring Centered
Solenoid Indicator Lights Code
None
Port T Pressure Rating
3000 psi
Surge Suppressor/Damper Code
None
Port Restrictor Plugs
None
Port T Code
7
Valve Type
High-Performance
Port Restrictor Plug Code
None
AC/DC
DC
Electrical Options
None
Housing Code
None
Operation
Solenoid Operated
Solenoid Energization Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
