02-149288

Vickers D05 Solenoid Valve

Item #102043522

Auto Replenish

each One-time purchase

Product Details

DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
Port connections are made by mounting the valve on a manifold or subplate containing the interface.
Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.

Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening

Specifications

Coil Type	Flying Leads
Voltage & Frequency	220 VAC - 50 Hz
Electrical Connection	KU W/ Deutsch Connector
Function	3-Position Spring Centered, Double End
Design No.	60
Valve Type	Standard-Duty
Pilot/Drain	None
Surge Suppressor/Damper	None
Indicator Lights	No
Spool Code	1
AC/DC	AC
Model No.	DG4S4-011C-D-60
Coil Rating Code	D
Mechanical Options Code	None
Flow Direction Code	4
Solenoid	Double
Operation	Solenoid Operated
Seal Material	Buna-N
NFPA Size	D05
Port Restrictor Plugs	None
Port T Pressure Rating	1000 psi
Mechanical Options	None
Electrical Options Code	None
Electrical Options	None
Coil Type Code	None
Cycle Rate [Max]	N/A
Actuator Type	Solenoid
Response Type	Standard Response
Tank Port Rating	1000
Spool Spring Arrangement Code	C
Reducer Module	N/A
Crossover	All Ports Open
Pressure [Max]	3600 psi
Rated Flow [Max]	25 gal/min
Pressure Port Check Valve Pressure	N/A
Overrides	No Overrides
Pilot Valve Type	N/A
Center Position	P to A & T, B Blocked
Weight	10.0 LB