These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Electrical Connection
Wired Terminal Block
Cycle Rate [Max]
N/A
Seal Material
Buna-N
EN Code
None
Spool Indicator Switch Code
None
Pressure Port Check Valve Pressure
N/A
Function Code
66
Manual Override Option Code
None
Voltage & Frequency
12 VDC
Pilot/Drain
None
Reducer Module
N/A
Surge Suppressor/Damper
None
Indicator Lights
Yes
Spool Code
66
Solenoid Code
G
Surge Suppressor/Damper Code
None
Port Restrictor Plug Code
None
Valve Type
High-Performance
Mechanical Options
None
Center Position
P Blocked, A & B to T
Spool Shift Timing
N/A
Housing Code
W
Solenoid Energization Code
None
Operation
Solenoid Operated
Design No.
60
AC/DC
DC
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Solenoid Indicator Lights Code
L
Pilot Valve Type
N/A
Electrical Connector Code
T
Port T Pressure Rating
3000 psi
Coil Rating Code
G
Rated Flow [Max]
21 gal/min
Overrides
No Overrides
Crossover
P Blocked, A or B to T
NFPA Size
D03
Spool Spring Arrangement Code
C
Electrical Options
None
Pressure [Max]
5075 psi
Actuator Type
Solenoid
Solenoid
Double
Port Restrictor Plugs
None
Response Type
Standard Response
Function
3-Position Spring Centered
Coil Type Code
F
Port T Code
7
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
