These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Center Position
All Ports Blocked
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Actuator Type
Solenoid
Mechanical Options
None
Electrical Connector Code
None
Pressure Port Check Valve Pressure
N/A
EN Code
None
Housing Code
W
Pressure [Max]
5075 psi
Spool Code
2
Solenoid
Single
NFPA Size
D03
Coil Type Code
F
Solenoid Code
H
Manual Override Option Code
None
Surge Suppressor/Damper Code
None
Rated Flow [Max]
21 gal/min
Crossover
All Ports Blocked
Spool Spring Arrangement Code
A
Voltage & Frequency
24 VDC
Port T Pressure Rating
150 psi
Pilot/Drain
None
Design No.
60
Operation
Solenoid Operated
Reducer Module
N/A
Electrical Options
None
Overrides
No Overrides
Function Code
2
Seal Material
Buna-N
Surge Suppressor/Damper
None
Spool Shift Timing
N/A
Coil Rating Code
H
Solenoid Indicator Lights Code
None
AC/DC
DC
Solenoid Energization Code
None
Pilot Valve Type
N/A
Port Restrictor Plug Code
None
Function
2-Position Spring Offset, End to End
Cycle Rate [Max]
N/A
Valve Type
High-Performance
Port T Code
2
Spool Indicator Switch Code
S5
Response Type
Standard Response
Indicator Lights
No
Port Restrictor Plugs
None
Electrical Connection
No Connector
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
