Find a Service Center
- Pressure Control Valve
- Pressure Reducing/Relieving Valve Type
- PRV2-10 Series
- Cartridge Only Port Size
- Pilot Operated Operation
caution
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Cracking Pressure [Max] | 2000 psi |
| Type | Pressure Reducing/Relieving Valve |
| Cracking Pressure [Min] | 100 psi |
| Cavity | C-10-3 |
| Adjustment Type | Factory Set |
| Pressure Setting | 500 psi |
| Flow [Max] | 10 gal/min |
| Series | PRV2-10 |
| Port Size | Cartridge Only |
| Seal Material | Buna-N |
| Pressure [Max] | 3500 psi |
| Manufacturer Part No. | PRV2-10-F-0-20/5 |
| Seal Kit Viton | 889599 |
| Housing Material | Cartridge Only |
| Model No. | PRV2-10-F-0-20/5 |
| Operation | Pilot Operated |
| Seal Kit Buna | 565804 |
| Weight | 0.54 LB |
