These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Function
3-Position Spring Centered
Solenoid
Double
Reducer Module
N/A
Spool Shift Timing
N/A
Mechanical Options
None
Response Type
Standard Response
Pressure [Max]
5075 psi
Coil Type Code
U1
Manual Override Option Code
None
NFPA Size
D03
Design No.
60
Electrical Options
None
Port Restrictor Plug Code
None
Overrides
No Overrides
Center Position
P Blocked, A & B to T
Surge Suppressor/Damper Code
None
Indicator Lights
No
EN Code
None
Pilot/Drain
None
Coil Type
Connector Fitted
Spool Code
6
Actuator Type
Solenoid
Spool Indicator Switch Code
None
Seal Material
Buna-N
Rated Flow [Max]
21 gal/min
Crossover
P Blocked, A or B to T
Port T Pressure Rating
3000 psi
Electrical Connection
Connector Fitted
Operation
Solenoid Operated
Voltage & Frequency
24 VDC
Electrical Connector Code
None
AC/DC
DC
Port Restrictor Plugs
None
Port T Code
7
Coil Rating Code
H
Solenoid Code
H
Solenoid Indicator Lights Code
None
Pilot Valve Type
N/A
Cycle Rate [Max]
N/A
Function Code
6
Housing Code
None
Surge Suppressor/Damper
None
Spool Spring Arrangement Code
C
Valve Type
High-Performance
Pressure Port Check Valve Pressure
N/A
Solenoid Energization Code
V
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
