These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Center Position
All Ports Blocked
Electrical Connector Code
None
Electrical Options
None
Solenoid Energization Code
None
AC/DC
AC
Port Restrictor Plug Code
None
Crossover
All Ports Blocked
Reducer Module
N/A
Mechanical Options
None
Voltage & Frequency
110 VAC – 50 Hz
Port Restrictor Plugs
None
Function
3-Position Spring Centered
EN Code
None
Port T Code
6
Pressure [Max]
5075 psi
Overrides
No Overrides
Pilot/Drain
None
Actuator Type
Solenoid
Function Code
2
Seal Material
Buna-N
Spool Code
2
NFPA Size
D03
Valve Type
High-Performance
Indicator Lights
No
Surge Suppressor/Damper Code
None
Spool Spring Arrangement Code
C
Pilot Valve Type
N/A
Surge Suppressor/Damper
None
Design No.
60
Spool Indicator Switch Code
None
Spool Shift Timing
N/A
Manual Override Option Code
H
Electrical Connection
DIN 43650
Rated Flow [Max]
21 gal/min
Solenoid
Double
Pressure Port Check Valve Pressure
N/A
Port T Pressure Rating
3000 psi
Coil Type Code
U
Cycle Rate [Max]
N/A
Operation
Solenoid Operated
Coil Rating Code
A
Coil Type
DIN 43650
Response Type
Standard Response
Solenoid Code
A
Solenoid Indicator Lights Code
None
Housing Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
