- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Electrical Connection | Lead Wires w/o Terminal Box |
| Overrides | No Overrides |
| Port T Pressure Rating | 1000 psi |
| Cycle Rate [Max] | N/A |
| AC/DC | AC |
| Fluid Cleanliness | 19/17/14 micron |
| NFPA Size | D05 |
| Port Restrictor Plugs | None |
| Electrical Options Code | None |
| Performance | Standard Performance |
| No. of Stages | Single Stage |
| Voltage & Frequency | 220/240 VAC - 50/60 Hz |
| Flow Direction Code | 4 |
| Leakage | Standard Performance |
| Tank Port Rating | 1000 |
| Actuator Type | Solenoid |
| Model No. | DG4S4-018C-D-60 |
| Solenoid | Double |
| Body Material | Gray Iron |
| Temperature Range [Min] | 68 °F |
| Mechanical Options Code | None |
| Temperature Range [Max] | 122 °F |
| Pilot Valve Type | N/A |
| Valve Type | Standard-Duty |
| Electrical Options | None |
| Coil Type | Flying Leads |
| Crossover | All Ports Open, Restricted |
| Center Position | P to T, A & B Blocked |
| Reducer Module | N/A |
| Seal Material | Buna-N |
| Rated Flow [Max] | 24 gal/min |
| Pressure [Max] | 3600 psi |
| Spool Code | 8 |
| Manual Override | Plain Override |
| Response Time | 20 to 40 ms |
| Compatible Fluids | Petroleum Oil |
| Mechanical Options | None |
| Surge Suppressor/Damper | None |
| Mounting | Subplate/Manifold Mount |
| Coil Rating Code | D |
| Operation | Solenoid Operated |
| Pilot/Drain | None |
| Design No. | 60 |
| Pressure Port Check Valve Pressure | N/A |
| Actuation Identification | Solenoid A, Solenoid B |
| Spool Spring Arrangement Code | C |
| Indicator Lights | No |
| Response Type | Standard Response |
| Function | 3-Position Spring Centered |
| Coil Type Code | None |
| Weight | 10.0 LB |

