Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Output Torque at Rated PSI (inch/pounds) | 2059 in lb |
| Shaft Type | Straight w/ Woodruff Key, Corrosion Resistant |
| Duty | Corrosion Resistant-Duty |
| Pilot Diameter | 1.75 in |
| Flow [Max] | 15 gal/min |
| Special Features Hardware Code | 00 |
| Pressure [Max] | 1650 psi |
| Series | H Series |
| Case Drain Code | 0 |
| Port Type | NPTF |
| Displacement (in³/rev) | 9.7 |
| Splines | 0 |
| Port Location | Side Port |
| Special Features Assembly Code | 0 |
| Motor Element | Gerotor |
| Case Drain | None |
| Port Size & Location | 1/2 in NPTF Side |
| Special Features | None |
| Bolt Circle Dia. | 3 1/4 in |
| Paint/Packaging | Environmental Coated Gloss White |
| Shaft Size & Type | Straight |
| Rotation | Standard Rotation |
| Mount Type | 4 Bolt |
| Motor Type | Spool Valve |
| Corrosion Resistant | Yes |
| Mounting Type Code | B |
| RPM [Max] | 353 rpm |
| Mounting Hole Size | 3/8 in |
| Flange Orientation | Standard |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Holes | 3/8-16 |
| RPM [Min] | 353 rpm |
| Material | Cast Iron |
| Port Size | 1/2 |
| Seal Material | Buna-N |
| Port Code | B |
| Flow Rate | 57 lpm |
| Output Shaft Code | 27 |
| Paint Code | D |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Weight | 12.5 LB |
