Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Case Drain | None |
| Flange Orientation | Standard |
| Mounting Type Code | A |
| Corrosion Resistant | No |
| Duty | Standard-Duty |
| Bolt Circle Dia. | 4.187 in |
| Seal Material | Buna-N |
| Splines | 0 |
| Port Code | B |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Series | H Series |
| Displacement (in³/rev) | 9.7 |
| Flow Rate | 14 gal/min |
| Mounting Hole Size | 0.565 in |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Case Drain Code | 0 |
| Shaft Size & Type | Straight |
| Pressure [Max] | 1650 psi |
| Paint Code | A |
| Port Location | Side Port |
| Pilot Diameter | 3.25 in |
| Rotation | Standard Rotation |
| Port Size & Location | 1/2 in NPTF Side |
| Output Shaft Code | 08 |
| Special Features | None |
| Mount Type | 2 Bolt |
| Inlet Pressure [Max] | 2500 psi |
| Motor Type | Spool Valve |
| Motor Element | Gerotor |
| Flow [Max] | 15 gal/min |
| Special Features Assembly Code | 0 |
| Material | Cast Iron |
| Port Size | 1/2, 1/2-14 |
| Output Torque at Rated PSI (inch/pounds) | 2062 in lb |
| Special Features Hardware Code | 00 |
| Port Type | NPTF |
| Mounting Holes | 0.535 in |
| Shaft Type | Straight w/ Cross Hole |
| RPM [Max] | 353 rpm |
| RPM [Min] | 353 rpm |
| Weight | 12.5 LB |
