Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Flow [Max] | 15 gal/min |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Material | Cast Iron |
| Rotation | Standard Rotation |
| Pressure [Max] | 1650 psi |
| Mounting Holes | 0.535 in |
| Port Location | Side Port |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Motor Element | Gerotor |
| Port Size & Location | SAE-10 Side |
| Motor Type | Spool Valve |
| Mount Type | 2 Bolt |
| Port Type | SAE O-Ring |
| Shaft Type | Straight w/ Woodruff Key |
| Seal Material | Buna-N |
| Special Features | None |
| Port Size | SAE-10, 7/8-14 UNF |
| RPM [Min] | 353 rpm |
| Case Drain Code | 1 |
| Port Code | A |
| Flow Rate | 15 gal/min |
| Mounting Type Code | A |
| Duty | Standard-Duty |
| Paint Code | A |
| Output Torque at Rated PSI (inch/pounds) | 2062.22 in lb |
| Splines | 0 |
| Special Features Hardware Code | 00 |
| Inlet Pressure [Max] | 2500 psi |
| Flange Orientation | Standard |
| Special Features Assembly Code | 0 |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Pilot Diameter | 3.25 in |
| Bolt Circle Dia. | 4.19 in |
| Mounting Hole Size | 0.535 in |
| Output Shaft Code | 01 |
| RPM [Max] | 353 rpm |
| Corrosion Resistant | No |
| Series | H Series |
| Displacement (in³/rev) | 9.7 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Weight | 13.0 LB |
