Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 5.86 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Paint Code | A |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Mounting Holes | 0.535 in |
| Bolt Circle Dia. | 4.187 in |
| Port Size & Location | SAE-10 Side |
| Special Features Assembly Code | 0 |
| Corrosion Resistant | No |
| Flange Orientation | Standard |
| Duty | Standard-Duty |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Output Torque at Rated PSI (inch/pounds) | 1372 in lb |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| RPM [Max] | 585 rpm |
| Flow Rate | 14 gal/min |
| Motor Element | Gerotor |
| Mount Type | 2 Bolt |
| Material | Cast Iron |
| Port Type | SAE O-Ring |
| Shaft Type | Straight w/ Woodruff Key |
| Pressure [Max] | 1800 psi |
| Displacement (in³/rev) | 5.86 |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Rotation | Standard Rotation |
| Mounting Hole Size | 0.565 in |
| Flow [Max] | 15 gal/min |
| Pilot Diameter | 3.25 in |
| Mounting Type Code | A |
| Motor Type | Spool Valve |
| Splines | 0 |
| Inlet Pressure [Max] | 2500 psi |
| Port Code | A |
| Series | H Series |
| Special Features | Free Running Gerotor |
| RPM [Min] | 585 rpm |
| Seal Material | Buna-N |
| Geroter/Geroler Options | Free Running |
| Case Drain Code | 0 |
| Output Shaft Code | 01 |
| Port Location | Side Port |
| Case Drain | None |
| Special Features Hardware Code | AA |
| Weight | 13.0 LB |
