Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 11.29 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- SAE ports
- Splined and tapered shafts
| Seal Material | Buna-N |
| Displacement (in³/rev) | 11.29 |
| RPM [Max] | 304 rpm |
| Rotation | Standard Rotation |
| Pilot Diameter | 3.25 in |
| Case Drain | G 1/4 (BSP) |
| Special Features Hardware Code | 00 |
| Mounting Holes | 0.535 in |
| Maximum Speed @ Continuous Flow | 304 rpm @ 15 gal/min |
| Bolt Circle Dia. | 4.187 in |
| Port Code | D |
| Output Shaft Code | 24 |
| Inlet Pressure [Max] | 2500 psi |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Hole Size | 0.565 in |
| Shaft Type | Straight |
| Shaft Size & Type | Straight |
| Special Features | None |
| Flange Orientation | Standard |
| Duty | Standard-Duty |
| Special Features Assembly Code | 0 |
| Output Torque at Rated PSI (inch/pounds) | 2343 in lb |
| Series | H Series |
| Port Type | Manifold |
| Motor Element | Gerotor |
| Splines | 0 |
| Port Size | Manifold, M8 x 1.25 Threads |
| Port Location | Side Port |
| Mounting Type Code | A |
| Paint Code | A |
| Pressure [Max] | 1600 psi |
| Corrosion Resistant | No |
| Flow [Max] | 15 gal/min |
| Case Drain Code | 2 |
| Mount Type | 2 Bolt |
| Motor Type | Spool Valve |
| Weight | 13.0 LB |
