Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 17.94 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Motor Element | Gerotor |
| Motor Type | Spool Valve |
| Special Features | Low Speed Valve |
| Rotation | Standard Rotation |
| Special Features Assembly Code | 0 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Mounting Holes | 0.535 in |
| Splines | 0 |
| Mounting Type Code | A |
| Flange Orientation | Standard |
| Port Code | A |
| Pressure [Min] | 600 psi |
| Pilot Diameter | 3.25 in |
| Port Size & Location | SAE-10 Side |
| Shaft Type | Straight w/ Woodruff Key |
| Output Shaft Code | 01 |
| Series | H Series |
| Duty | Standard-Duty |
| Case Drain | None |
| RPM [Max] | 192 rpm |
| Material | Cast Iron |
| Bolt Circle Dia. | 4.187 in |
| Pressure [Max] | 1350 psi |
| Corrosion Resistant | No |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Flow [Max] | 15 gal/min |
| Seal Material | Buna-N |
| Port Type | SAE O-Ring |
| Displacement (in³/rev) | 17.94 |
| Port Location | Side Port |
| Output Torque at Rated PSI (inch/pounds) | 3107 in lb |
| Special Features Hardware Code | AB |
| Inlet Pressure [Max] | 2500 psi |
| Case Drain Code | 0 |
| Mounting Hole Size | 0.565 in |
| RPM [Min] | 192 rpm |
| Paint Code | A |
| Flow Rate | 14 gal/min |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Mount Type | 2 Bolt |
| Weight | 13.0 LB |
