Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Location | Side Port |
| Port Type | SAE O-Ring |
| Case Drain Code | 0 |
| RPM [Max] | 585 rpm |
| Series | H Series |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Shaft Type | Splined |
| Splines | 6 |
| Shaft Size & Type | 1 in - 6T Spline |
| RPM [Min] | 585 rpm |
| Special Features Hardware Code | 00 |
| Duty | Standard-Duty |
| Inlet Pressure [Max] | 2500 psi |
| Special Features Assembly Code | 0 |
| Mounting Type Code | A |
| Mount Type | 2 Bolt |
| Motor Type | Spool Valve |
| Flow [Max] | 15 gal/min |
| Bolt Circle Dia. | 4.19 in |
| Seal Material | Buna-N |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Port Code | A |
| Case Drain | None |
| Pilot Diameter | 3.25 in |
| Corrosion Resistant | No |
| Flow Rate | 15 gal/min |
| Paint Code | A |
| Rotation | Standard Rotation |
| Displacement (in³/rev) | 5.9 |
| Mounting Hole Size | 0.535 in |
| Port Size | SAE-10, 7/8-14 UNF |
| Mounting Holes | 0.535 in |
| Port Size & Location | SAE-10 Side |
| Motor Element | Gerotor |
| Flange Orientation | Standard |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Special Features | None |
| Material | Cast Iron |
| Pressure [Max] | 1800 psi |
| Output Shaft Code | 02 |
| Weight | 11.8 LB |
