Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Special Features | None |
| Port Size & Location | 1/2 in NPTF Side |
| Shaft Size & Type | 1 in - 6T Spline |
| Pilot Diameter | 3.25 in |
| Port Type | NPTF |
| Displacement (in³/rev) | 9.7 |
| Inlet Pressure [Max] | 2500 psi |
| Flange Orientation | Standard |
| Seal Material | Buna-N |
| Case Drain | None |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Output Shaft Code | 02 |
| Paint Code | A |
| Output Torque at Rated PSI (inch/pounds) | 2062.22 in lb |
| Material | Cast Iron |
| Port Size | 1/2, 1/2-14 |
| Flow [Max] | 15 gal/min |
| Corrosion Resistant | No |
| Motor Type | Spool Valve |
| Series | H Series |
| Mount Type | 2 Bolt |
| Pressure [Max] | 1650 psi |
| Shaft Type | Splined |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Hole Size | 0.535 in |
| Motor Element | Gerotor |
| Rotation | Standard Rotation |
| Port Code | B |
| Flow Rate | 15 gal/min |
| Mounting Holes | 0.535 in |
| RPM [Min] | 353 rpm |
| Special Features Hardware Code | 00 |
| Case Drain Code | 0 |
| Mounting Type Code | A |
| Special Features Assembly Code | 0 |
| Duty | Standard-Duty |
| Port Location | Side Port |
| RPM [Max] | 353 rpm |
| Bolt Circle Dia. | 4.19 in |
| Splines | 6 |
| Weight | 12.5 LB |
