Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC-2B Manifold Port
- 4.52 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Case Drain Code | 0 |
| Flange Orientation | Standard |
| Shaft Size & Type | 1 in - 6T Spline |
| Seal Material | Buna-N |
| Pilot Diameter | 1.75 in |
| Mounting Holes | 3/8-16 |
| Flow [Max] | 15 gal/min |
| Shaft Type | Splined |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC-2B |
| Port Location | Side Port |
| Motor Element | Gerotor |
| Motor Type | Spool Valve |
| Displacement (in³/rev) | 4.52 |
| Inlet Pressure [Max] | 2500 psi |
| Duty | Standard-Duty |
| Splines | 6 |
| Series | H Series |
| Rotation | Standard Rotation |
| Port Code | C |
| Case Drain | None |
| Mounting Hole Size | 3/8 in |
| Mounting Type Code | B |
| Mount Type | 4 Bolt |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Flow Rate | 14 gal/min |
| Corrosion Resistant | No |
| Special Features Assembly Code | 0 |
| Paint Code | A |
| Pressure [Max] | 1800 psi |
| RPM [Min] | 760 rpm |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Output Shaft Code | 02 |
| Material | Cast Iron |
| Special Features Hardware Code | 00 |
| Special Features | None |
| Bolt Circle Dia. | 3 1/4 in |
| Port Type | Manifold |
| RPM [Max] | 760 rpm |
| Weight | 11.5 LB |
