Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| Output Shaft Code | 02 |
| Case Drain | None |
| Displacement (in³/rev) | 9.7 |
| Splines | 6 |
| Rotation | Standard Rotation |
| Duty | Standard-Duty |
| Material | Cast Iron |
| Corrosion Resistant | No |
| Mounting Hole Size | 3/8 in |
| Special Features Assembly Code | 0 |
| Flow [Max] | 15 gal/min |
| Motor Type | Spool Valve |
| Mounting Holes | 3/8-16 |
| Shaft Type | Splined |
| Port Location | Side Port |
| Mount Type | 4 Bolt |
| Port Type | SAE O-Ring |
| Pilot Diameter | 1.75 in |
| Pressure [Max] | 1650 psi |
| Port Code | A |
| Flow Rate | 15 gal/min |
| Series | H Series |
| Paint/Packaging | Low Gloss Black, Individual Box |
| RPM [Max] | 353 rpm |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Seal Material | Buna-N |
| Output Torque at Rated PSI (inch/pounds) | 2062.22 in lb |
| Mounting Type Code | B |
| Special Features | None |
| Port Size | SAE-10, 7/8-14 UNF |
| Bolt Circle Dia. | 3 1/4 in |
| Paint Code | A |
| Shaft Size & Type | 1 in - 6T Spline |
| Inlet Pressure [Max] | 2500 psi |
| Case Drain Code | 0 |
| Special Features Hardware Code | 00 |
| Motor Element | Gerotor |
| Port Size & Location | SAE-10 Side |
| Flange Orientation | Standard |
| Weight | 12.5 LB |
