Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 4.52 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Shaft Size & Type | 1 in - 6T Spline |
| Seal Material | Buna-N |
| Flow Rate | 14 gal/min |
| Mounting Hole Size | 3/8 in |
| Motor Type | Spool Valve |
| Flow [Max] | 15 gal/min |
| Special Features Hardware Code | 00 |
| Special Features | None |
| RPM [Max] | 760 rpm |
| Material | Cast Iron |
| Corrosion Resistant | No |
| Motor Element | Gerotor |
| Bolt Circle Dia. | 3 1/4 in |
| Port Size & Location | SAE-10 Side |
| Port Location | Side Port |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Port Type | SAE O-Ring |
| Rotation | Standard Rotation |
| Port Code | A |
| Mounting Type Code | B |
| Case Drain Code | 0 |
| Displacement (in³/rev) | 4.52 |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Holes | 3/8-16 |
| RPM [Min] | 760 rpm |
| Duty | Standard-Duty |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Paint Code | A |
| Series | H Series |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Special Features Assembly Code | 0 |
| Shaft Type | Splined |
| Splines | 6 |
| Mount Type | 4 Bolt |
| Case Drain | None |
| Pilot Diameter | 1.75 in |
| Output Shaft Code | 02 |
| Flange Orientation | Standard |
| Pressure [Max] | 1800 psi |
| Weight | 11.5 LB |
