Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Material | Cast Iron |
| Shaft Type | Splined |
| Port Size | 1/2, 1/2-14 |
| Pressure [Max] | 1800 psi |
| Mounting Hole Size | 3/8 in |
| Case Drain | None |
| Mounting Type Code | B |
| Motor Element | Gerotor |
| RPM [Max] | 585 rpm |
| Port Size & Location | 1/2 in NPTF Side |
| Motor Type | Spool Valve |
| Bolt Circle Dia. | 3 1/4 in |
| Rotation | Standard Rotation |
| Mount Type | 4 Bolt |
| Pilot Diameter | 1.75 in |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Splines | 6 |
| Special Features | None |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Special Features Hardware Code | 00 |
| Series | H Series |
| Case Drain Code | 0 |
| Port Location | Side Port |
| Flange Orientation | Standard |
| Special Features Assembly Code | 0 |
| Duty | Standard-Duty |
| Corrosion Resistant | No |
| Port Type | NPTF |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Output Shaft Code | 02 |
| RPM [Min] | 585 rpm |
| Flow Rate | 15 gal/min |
| Flow [Max] | 15 gal/min |
| Port Code | B |
| Seal Material | Buna-N |
| Mounting Holes | 3/8-16 |
| Paint Code | A |
| Displacement (in³/rev) | 5.9 |
| Shaft Size & Type | 1 in - 6T Spline |
| Inlet Pressure [Max] | 2500 psi |
| Weight | 11.8 LB |
