Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| Special Features Assembly Code | 0 |
| Pressure [Max] | 1450 psi |
| Mounting Type Code | B |
| RPM [Max] | 243 rpm |
| Case Drain Code | 0 |
| Duty | Standard-Duty |
| Output Torque at Rated PSI (inch/pounds) | 2669 in lb |
| Rotation | Standard Rotation |
| Special Features | None |
| Flow [Max] | 15 gal/min |
| Port Location | Side Port |
| Pilot Diameter | 1.75 in |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Shaft Type | Straight w/ Woodruff Key |
| Special Features Hardware Code | 00 |
| Seal Material | Buna-N |
| Mounting Hole Size | 3/8 in |
| Mounting Holes | 3/8-16 |
| Corrosion Resistant | No |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Inlet Pressure [Max] | 2500 psi |
| Displacement (in³/rev) | 14.1 |
| Series | H Series |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Case Drain | None |
| Motor Type | Spool Valve |
| Flange Orientation | Standard |
| Port Code | C |
| Flow Rate | 15 gal/min |
| Bolt Circle Dia. | 3 1/4 in |
| Mount Type | 4 Bolt |
| Output Shaft Code | 01 |
| Port Type | Manifold |
| Splines | 0 |
| Motor Element | Gerotor |
| Paint Code | A |
| Weight | 13.3 LB |
