Find a Service Center
- 3" Center Distance
- 15:1 Ratio
- C-Face Quilled
- Left Output
- 140TC/180C Frame
features
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Sudden, slam-type stalling should be avoided. Applications of this kind, which are beyond the expected normal performance of pneumatic power motors, will damage the power train due to the dynamic shock loads imposed.
| Motor Application | General Purpose |
| Max. Thrust Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Center Distance | 3 in |
| Frame | 140TC, 180C |
| Max. Thrust Load @ 1150 rpm | 1000 lb/in |
| Use With | 730 |
| Output Torque @ RPM | 1969 in lb @ 1750 rpm, 2425 in lb @ 1150 rpm |
| Input Configuration | C-Face Quilled |
| Max. Overhung Load @ 1750 rpm | 1250 lb/in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Family Name | F |
| Base to Centerline of Input Shaft | 6 1/4 in |
| Output Configuration | Left Output |
| Input HP @ RPM | 3.41 hp @ 1150 rpm, 3.97 hp @ 1750 rpm |
| Lubrication | None |
| Input (Shaft or Bore) Size | 7/8 in |
| Fan Cooled | No |
| Reduction Type | Single Reduction |
| Ratio | 15:1 |
| Base to Centerline of Output Shaft | 3 1/4 in |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Washdown Duty | No |
| Frame Size | 140TC, 180C |
| Output (Shaft or Bore) Size | 1 1/4 in |
| Worm Position | Universal |
| Torque Out @ 1750 rpm | 1969 in lb |
| Housing Material | Cast Iron |
| Max. Overhung Load @ RPM | 1250 lb/in @ 1150 rpm, 1250 lb/in @ 1750 rpm |
| Box Width | 6 49/64 in |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Bolt Center | 7 in x 4 in |
| HP @ RPM | 3 hp @ 1800 rpm |
| Box Length | 8 1/8 in |
| Torque Out @ 1150 rpm | 2425 in lb |
| Box Height | 8 7/8 in |
| Weight | 55.1 LB |
| EAN or UPC | 781711606889 |
