Find a Service Center
- 3" Center Distance
- 15:1 Ratio
- Shaft Input
- Left & Right Output
- No Lubricant
features
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Tags shall contain a signal word and a major message.
- Danger tags indicate an imminently hazardous situation which, if not avoided, will result in death or serious injury. The signal word Danger is to be limited to the most extreme situations. Danger tags should not be used for property damage hazards unless
- Note: A tag shall not be used in place of a permanent sign or label intended for hazards in normal use, operation or maintenance.
| Max. Thrust Load @ 1150 rpm | 1000 lb/in |
| Lubrication | None |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Output Configuration | Left & Right Output |
| Output Torque @ RPM | 1969 in lb @ 1750 rpm, 2425 in lb @ 1150 rpm |
| HP @ RPM | 3 hp @ 1800 rpm |
| Ratio | 15:1 |
| Max. Thrust Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Base to Centerline of Output Shaft | 3 1/4 in |
| Housing Material | Cast Iron |
| Torque Out @ 1750 rpm | 1969 in lb |
| Box Width | 6 49/64 in |
| Bolt Center | 7 in x 4 in |
| Fan Cooled | No |
| Family Name | Std Unit |
| Max. Overhung Load @ 1750 rpm | 1250 lb/in |
| Center Distance | 3 in |
| Output (Shaft or Bore) Size | 1 1/4 in |
| Input Configuration | Shaft Input |
| Worm Position | Universal |
| Washdown Duty | No |
| Base to Centerline of Input Shaft | 6 1/4 in |
| Input (Shaft or Bore) Size | 7/8 in |
| Max. Overhung Load @ RPM | 1250 lb/in @ 1150 rpm, 1250 lb/in @ 1750 rpm |
| Box Length | 8 45/64 in |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Input HP @ RPM | 3.41 hp @ 1150 rpm, 3.97 hp @ 1750 rpm |
| Box Height | 8 7/8 in |
| Frame Size | Shaft Input, Not a C-Face |
| Use With | 730 |
| Torque Out @ 1150 rpm | 2425 in lb |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Motor Application | General Purpose |
| Reduction Type | Single Reduction |
| Frame | N/A |
| Weight | 55.1 LB |
| EAN or UPC | 781711648308 |
