Find a Service Center
- 2 3/8" Center Distance
- 25:1 Ratio
- Shaft Input
- Right Output
- Universal Worm Position
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Family Name | Std Unit |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Input Configuration | Shaft Input |
| Output RPM @ 1750 rpm Input | 70 rpm |
| Use With | 724 |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Output Configuration | Right Output |
| Frame | N/A |
| Shaft Assembly Code | J |
| Center Distance | 2.375 in |
| Worm Position | Universal |
| Output Torque @ RPM | 1150 in lb @ 1150 rpm, 1199 in lb @ 1750 rpm |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Washdown Duty | No |
| Lubrication | None |
| Input (Shaft or Bore) Size | 3/4 in |
| Housing Material | Cast Iron |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Motor Application | General Purpose |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| HP @ RPM | 1 hp @ 1800 rpm |
| Fan Cooled | No |
| Torque Out @ 1150 rpm | 1150 in lb |
| Ratio | 25:1 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Output RPM @ Input RPM | 70 rpm @ 1750 rpm |
| Box Height | 6 15/16 in |
| Reduction Type | Single Reduction |
| Bolt Center | 7 1/16 in x 4 7/8 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Box Length | 6 3/8 in |
| Torque Out @ 1750 rpm | 1199 in lb |
| Input HP @ RPM | 1.03 hp @ 1150 rpm, 1.55 hp @ 1750 rpm |
| Box Width | 4 1/16 in |
| Max. Input HP @ 100 rpm | 0.14 hp |
| Frame Size | Shaft Input, Not a C-Face |
| Weight | 29.1 LB |
| EAN or UPC | 781711517222 |
