These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
NFPA Size
D03
Design No.
60
Pressure [Max]
5075 psi
Pilot/Drain
None
Coil Type Code
F
Center Position
All Ports Blocked
Spool Shift Timing
N/A
Rated Flow [Max]
21 gal/min
Pressure Port Check Valve Pressure
N/A
Cycle Rate [Max]
N/A
Port T Code
7
Response Type
Standard Response
Valve Type
High-Performance
Electrical Connection
No Connector
Solenoid Code
G
Spool Spring Arrangement Code
C
Function Code
2
Reducer Module
N/A
Solenoid Indicator Lights Code
None
Housing Code
W
Voltage & Frequency
12 VDC
Electrical Connector Code
None
Mechanical Options
None
Port T Pressure Rating
3000 psi
Spool Indicator Switch Code
None
AC/DC
DC
Pilot Valve Type
N/A
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Coil Rating Code
G
Surge Suppressor/Damper Code
None
Function
3-Position Spring Centered
Seal Material
Buna-N
Manual Override Option Code
None
Operation
Solenoid Operated
Solenoid Energization Code
None
Overrides
No Overrides
Spool Code
2
Solenoid
Double
Surge Suppressor/Damper
None
Electrical Options
None
Crossover
All Ports Blocked
Indicator Lights
No
EN Code
None
Actuator Type
Solenoid
Port Restrictor Plugs
None
Port Restrictor Plug Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
