These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Reducer Module
N/A
Mechanical Options
None
Surge Suppressor/Damper Code
None
Pilot/Drain
None
Port T Pressure Rating
3000 psi
Pressure [Max]
5075 psi
Spool Code
66
EN Code
None
Solenoid Indicator Lights Code
None
Solenoid
Double
Electrical Connection
DIN 43650
Indicator Lights
No
AC/DC
AC
Electrical Options
None
Actuator Type
Solenoid
Coil Type Code
U
Response Type
Standard Response
Spool Indicator Switch Code
None
Port T Code
6
Cycle Rate [Max]
N/A
Spool Spring Arrangement Code
C
Coil Type
DIN 43650
Port Restrictor Plugs
None
Surge Suppressor/Damper
None
Valve Type
High-Performance
Solenoid Code
B
Port Restrictor Plug Code
None
Pressure Port Check Valve Pressure
N/A
Spool Shift Timing
N/A
Operation
Solenoid Operated
Solenoid Energization Code
None
Crossover
P Blocked, A or B to T
Overrides
No Overrides
Function Code
66
Center Position
P Blocked, A & B to T
NFPA Size
D03
Function
3-Position Spring Centered
Electrical Connector Code
None
Manual Override Option Code
None
Rated Flow [Max]
21 gal/min
Pilot Valve Type
N/A
Voltage & Frequency
110/120 VAC – 50/60 Hz
Design No.
60
Housing Code
None
Coil Rating Code
B
Seal Material
Buna-N
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
