These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Port Restrictor Plugs
None
Pressure Port Check Valve Pressure
N/A
Indicator Lights
Yes
Solenoid Code
H
Manual Override Option Code
None
Function
3-Position Detented
Reducer Module
N/A
NFPA Size
D03
Spool Code
2
Electrical Connector Code
T
Port T Code
7
Valve Type
High-Performance
Coil Rating Code
H
Seal Material
Buna-N
Coil Type Code
F
Electrical Connection
Wired Terminal Block
Spool Shift Timing
N/A
Operation
Solenoid Operated
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Crossover
All Ports Blocked
Port Restrictor Plug Code
None
Actuator Type
Solenoid
Spool Indicator Switch Code
None
Mechanical Options
None
Surge Suppressor/Damper Code
None
Rated Flow [Max]
21 gal/min
Solenoid
Double
Spool Spring Arrangement Code
N
Pressure [Max]
5075 psi
Response Type
Standard Response
Port T Pressure Rating
3000 psi
Pilot/Drain
None
AC/DC
DC
Solenoid Energization Code
None
Voltage & Frequency
24 VDC
Design No.
60
Electrical Options
None
Housing Code
W
EN Code
None
Cycle Rate [Max]
N/A
Overrides
No Overrides
Surge Suppressor/Damper
None
Function Code
2
Center Position
All Ports Blocked
Pilot Valve Type
N/A
Solenoid Indicator Lights Code
L
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
