These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Center Position
All Ports Open
Pilot Valve Type
N/A
Actuator Type
Solenoid
Overrides
No Overrides
Electrical Connector Code
None
Manual Override Option Code
None
Coil Type Code
U
Reducer Module
N/A
Function
3-Position Spring Centered
Spool Code
0
EN Code
None
Indicator Lights
No
Pressure Port Check Valve Pressure
N/A
Spool Shift Timing
N/A
Solenoid
Double
Response Type
Standard Response
Surge Suppressor/Damper
None
Port Restrictor Plug Code
None
Solenoid Indicator Lights Code
None
Cycle Rate [Max]
N/A
Coil Rating Code
G
Design No.
60
Voltage & Frequency
12 VDC
Port T Pressure Rating
3000 psi
Port T Code
7
Surge Suppressor/Damper Code
None
Pressure [Max]
5075 psi
Spool Indicator Switch Code
None
Function Code
0
Pilot/Drain
None
Seal Material
Buna-N
Electrical Options
None
Port Restrictor Plugs
None
Valve Type
High-Performance
AC/DC
DC
Mechanical Options
None
NFPA Size
D03
Solenoid Energization Code
None
Electrical Connection
DIN 43650
Spool Spring Arrangement Code
C
Coil Type
DIN 43650
Operation
Solenoid Operated
Solenoid Code
G
Housing Code
None
Crossover
All Ports Open
Rated Flow [Max]
21 gal/min
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
