These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Crossover
All Ports Blocked
Pressure Port Check Valve Pressure
N/A
Spool Code
2
Pressure [Max]
5075 psi
Solenoid Code
B
Surge Suppressor/Damper
None
Coil Rating Code
B
Port Restrictor Plug Code
None
Operation
Solenoid Operated
Cycle Rate [Max]
N/A
Coil Type
DIN 43650
Port T Code
6
Indicator Lights
No
Function Code
2
Solenoid Energization Code
None
Electrical Options
None
EN Code
None
Solenoid
Single
Voltage & Frequency
110/120 VAC – 50/60 Hz
Pilot/Drain
None
Seal Material
Buna-N
Solenoid Indicator Lights Code
None
AC/DC
AC
Spool Indicator Switch Code
None
Port T Pressure Rating
3000 psi
Valve Type
High-Performance
Surge Suppressor/Damper Code
None
Function
2-Position Spring Offset, End to End
Reducer Module
N/A
Spool Shift Timing
N/A
NFPA Size
D03
Overrides
No Overrides
Mechanical Options
None
Response Type
Standard Response
Design No.
60
Electrical Connector Code
None
Housing Code
None
Electrical Connection
DIN 43650
Rated Flow [Max]
21 gal/min
Port Restrictor Plugs
None
Actuator Type
Solenoid
Manual Override Option Code
None
Pilot Valve Type
N/A
Spool Spring Arrangement Code
AL
Center Position
All Ports Blocked
Coil Type Code
U
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
