These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid
Double
Coil Type Code
U
Manual Override Option Code
None
Solenoid Energization Code
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
Mechanical Options
None
Port Restrictor Plug Code
None
Pilot/Drain
None
Housing Code
None
Crossover
All Ports Blocked
Spool Spring Arrangement Code
N
NFPA Size
D03
Seal Material
Buna-N
Spool Code
2
Function Code
2
Response Type
Standard Response
Solenoid Code
B
Electrical Connector Code
None
Solenoid Indicator Lights Code
None
EN Code
None
Actuator Type
Solenoid
Pilot Valve Type
N/A
Function
3-Position Detented
Operation
Solenoid Operated
Electrical Options
None
Port T Code
6
Electrical Connection
DIN 43650
Surge Suppressor/Damper
None
Coil Rating Code
B
Port Restrictor Plugs
None
Pressure Port Check Valve Pressure
N/A
Indicator Lights
No
Port T Pressure Rating
3000 psi
Spool Shift Timing
N/A
AC/DC
AC
Surge Suppressor/Damper Code
None
Coil Type
DIN 43650
Center Position
All Ports Blocked
Cycle Rate [Max]
N/A
Design No.
60
Pressure [Max]
5075 psi
Spool Indicator Switch Code
None
Overrides
No Overrides
Reducer Module
N/A
Rated Flow [Max]
21 gal/min
Valve Type
High-Performance
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
