These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Electrical Options
None
Electrical Connector Code
None
Solenoid Energization Code
None
Spool Indicator Switch Code
None
Housing Code
W
AC/DC
AC
Port Restrictor Plugs
None
Manual Override Option Code
None
Design No.
60
Overrides
No Overrides
Spool Code
2
Operation
Solenoid Operated
Rated Flow [Max]
21 gal/min
Surge Suppressor/Damper Code
None
Pressure Port Check Valve Pressure
N/A
Pilot Valve Type
N/A
Spool Shift Timing
N/A
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Mechanical Options
None
Response Type
Standard Response
Coil Type Code
F
Function
2-Position Spring Offset, End to End
Voltage & Frequency
110/120 VAC – 50/60 Hz
Pilot/Drain
None
Spool Spring Arrangement Code
AL
NFPA Size
D03
Solenoid Code
B
Electrical Connection
No Connector
Solenoid
Single
Indicator Lights
No
Cycle Rate [Max]
N/A
Solenoid Indicator Lights Code
None
Seal Material
Buna-N
Reducer Module
N/A
Actuator Type
Solenoid
Pressure [Max]
5075 psi
Valve Type
High-Performance
Port T Pressure Rating
3000 psi
EN Code
None
Crossover
All Ports Blocked
Center Position
All Ports Blocked
Port T Code
6
Port Restrictor Plug Code
None
Surge Suppressor/Damper
None
Coil Rating Code
B
Function Code
2
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back