- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Offset Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Solenoid | Single |
| Coil Rating Code | None |
| Temperature Range [Min] | 68 °F |
| Fluid Cleanliness | 19/17/14 micron |
| Valve Type | Standard-Duty |
| Body Material | Gray Iron |
| Spool Code | 0 |
| Actuator Type | Solenoid |
| Pressure Port Check Valve Pressure | N/A |
| Voltage & Frequency | 115 VAC - 60 Hz |
| Tank Port Rating | 1000 |
| Leakage | Standard Performance |
| Seal Material | Buna-N |
| Pilot Valve Type | N/A |
| Compatible Fluids | Petroleum Oil |
| Temperature Range [Max] | 122 °F |
| Performance | Standard Performance |
| Flow Direction Code | 4 |
| Electrical Connection | Ground Terminal |
| Overrides | No Overrides |
| Mounting | Subplate/Manifold Mount |
| Pilot/Drain | None |
| Cycle Rate [Max] | N/A |
| Center Position | All Ports Open |
| Pressure [Max] | 12000 psi |
| Mechanical Options | Single Solenoid Reverse Assembly |
| Port T Pressure Rating | 1000 psi |
| Indicator Lights | No |
| No. of Stages | Single Stage |
| Port Restrictor Plugs | None |
| Design No. | 50 |
| Actuation Identification | Solenoid B |
| Coil Type | No Coil |
| Surge Suppressor/Damper | None |
| Electrical Options Code | None |
| Crossover | All Ports Open |
| Function | 2-Position Spring Offset |
| Model No. | DG4S4-010A-50-LH |
| Operation | Solenoid Operated |
| NFPA Size | D05 |
| Spool Spring Arrangement Code | A |
| Mechanical Options Code | LH |
| Manual Override | Plain Override |
| Electrical Options | None |
| Rated Flow [Max] | 24 gal/min |
| AC/DC | AC |
| Reducer Module | N/A |
| Solenoid Air Gap Code | None |
| Response Type | Standard Response |
| Weight | 10.0 LB |

