Find a Service Center
- Flow Control Valve
- Flow Divider/Combiner Type
- FDC1-16 Series
- 12 gal/min Minimum Flow
- 47 gal/min Maximum Flow
description
- Pressure-compensated, spool-type, screw-in, flow divider/combiner cartridge. This valve is used in the dividing mode. It will take the inlet flow (port 3) and split the flow according to the ratio specified, regardless of system pressure to ports 2 and 4. In the combining mode this valve will take the inlet flows from ports 2 and 4 and combine them into port 3 according to the ratio specified.
caution
- To clean polycarbonate bowls, use mild soap and water only
- do not use cleansing agents such as acetone, benzene, carbon tetrachloride, gasoline, toluene, etc., which damage this plastic
| Port Type | Cartridge Only |
| Recommend Filtration Level | 18/16/13 microns |
| Flow [Max] | 47 gal/min |
| Seal Kit Buna | 889634 |
| Seal Kit Viton | 889638 |
| Leakage | Standard |
| Manufacturer Part No. | FDC1-16-0-66 |
| Divider Flow | 35 gal/min |
| No. of Valve Ports | 4 |
| Pressure [Max] | 3000 psi |
| Housing Material | Aluminum |
| Temperature Range [Max] | 248 °F |
| No. of Housing Ports | 4 |
| Body Type | 10 |
| Seal Material | Buna-N |
| Valve Torque into Cavity | 108 to 122 Nm |
| Temperature Range [Min] | -40 °F |
| Cavity | C-16-4 |
| Style | Spool |
| Installation | Screw-in Cartridge |
| Series | FDC1-16 |
| Model No. | FDC1-16-0-66 |
| Type | Flow Divider/Combiner |
| Flow [Min] | 12 gal/min |
| Weight | 0.78 LB |
