These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Indicator Lights
No
Reducer Module
N/A
Solenoid
Double
NFPA Size
D03
Spool Shift Timing
N/A
Spool Code
8
Coil Type Code
F
Electrical Connector Code
None
AC/DC
AC
Solenoid Code
D
Function
3-Position Spring Centered
Valve Type
High-Performance
EN Code
None
Port T Code
6
Center Position
P to T, A & B Blocked
Spool Indicator Switch Code
None
Port Restrictor Plugs
None
Actuator Type
Solenoid
Seal Material
Buna-N
Mechanical Options
None
Response Type
Standard Response
Cycle Rate [Max]
N/A
Coil Rating Code
D
Electrical Options
None
Surge Suppressor/Damper
None
Surge Suppressor/Damper Code
None
Rated Flow [Max]
21 gal/min
Electrical Connection
No Connector
Function Code
8
Port T Pressure Rating
3000 psi
Pressure [Max]
5075 psi
Design No.
61
Solenoid Energization Code
V
Manual Override Option Code
None
Operation
Solenoid Operated
Pilot/Drain
None
Pressure Port Check Valve Pressure
N/A
Solenoid Indicator Lights Code
None
Port Restrictor Plug Code
None
Voltage & Frequency
220/240 VAC – 50/60 Hz
Overrides
No Overrides
Spool Spring Arrangement Code
C
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Pilot Valve Type
N/A
Crossover
All Ports Open, Restricted
Housing Code
W
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back