These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Function Code
0
Port T Code
6
NFPA Size
D03
Pressure Port Check Valve Pressure
N/A
EN Code
None
Cycle Rate [Max]
N/A
Coil Type Code
F
Spool Code
0
Port Restrictor Plug Code
None
Function
2-Position Spring Offset, End to Center
Solenoid
Single
Actuator Type
Solenoid
Housing Code
W
Valve Type
High-Performance
Spool Indicator Switch Code
None
Mechanical Options
None
AC/DC
AC
Solenoid Indicator Lights Code
L
Response Type
Standard Response
Surge Suppressor/Damper
None
Spool Spring Arrangement Code
BL
Surge Suppressor/Damper Code
None
Overrides
No Overrides
Indicator Lights
Yes
Center Position
All Ports Open
Seal Material
Buna-N
Electrical Connection
Five Pin Connector
Solenoid Code
B
Voltage & Frequency
110/120 VAC – 50/60 Hz
Port T Pressure Rating
3000 psi
Pressure [Max]
5075 psi
Electrical Options
None
Rated Flow [Max]
21 gal/min
Solenoid Energization Code
None
Spool Shift Timing
N/A
Crossover
All Ports Open
Design No.
60
Pilot Valve Type
N/A
Reducer Module
N/A
Operation
Solenoid Operated
Electrical Connector Code
PA5
Pilot/Drain
None
Manual Override Option Code
None
Port Restrictor Plugs
None
Coil Rating Code
B
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back