- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Offset Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Body Material | Gray Iron |
| Pilot/Drain | None |
| Temperature Range [Min] | 68 °F |
| Coil Type | Flying Leads |
| Mounting | Subplate/Manifold Mount |
| Leakage | Standard Performance |
| Compatible Fluids | Petroleum Oil |
| Overrides | No Overrides |
| Fluid Cleanliness | 19/17/14 micron |
| Reducer Module | N/A |
| Temperature Range [Max] | 122 °F |
| Tank Port Rating | 1000 |
| Coil Type Code | None |
| Pressure Port Check Valve Pressure | N/A |
| Coil Rating Code | B |
| Electrical Options Code | LW |
| Model No. | DG4S4LW-012A-B-60-LH |
| Spool Spring Arrangement Code | A |
| No. of Stages | Single Stage |
| Actuation Identification | Solenoid B |
| NFPA Size | D05 |
| Pilot Valve Type | N/A |
| Response Type | Standard Response |
| Cycle Rate [Max] | N/A |
| Electrical Connection | Lead Wires w/ Terminal Box |
| Response Time | 18 to 25 ms |
| Operation | Solenoid Operated |
| Port Restrictor Plugs | None |
| Spool Code | 2 |
| Electrical Options | None |
| Mechanical Options Code | LH |
| Performance | Standard Performance |
| Seal Material | Buna-N |
| Function | 2-Position Spring Offset |
| Pressure [Max] | 4500 psi |
| Design No. | 60 |
| Actuator Type | Solenoid |
| Mechanical Options | Single Solenoid Reverse Assembly |
| Flow Direction Code | 4 |
| Voltage & Frequency | 110/120 VAC - 50/60 Hz |
| AC/DC | AC |
| Manual Override | Plain Override |
| Center Position | All Ports Blocked |
| Indicator Lights | Yes |
| Solenoid | Single |
| Valve Type | Standard-Duty |
| Crossover | All Ports Blocked |
| Surge Suppressor/Damper | None |
| Port T Pressure Rating | 1000 psi |
| Rated Flow [Max] | 24 gal/min |
| Weight | 10.0 LB |

