These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Pilot/Drain
None
Seal Material
Buna-N
AC/DC
AC
Solenoid Indicator Lights Code
None
Electrical Connection
No Connector
Cycle Rate [Max]
N/A
Operation
Solenoid Operated
Center Position
All Ports Blocked
Overrides
No Overrides
Rated Flow [Max]
21 gal/min
Design No.
60
Function Code
2
Actuator Type
Solenoid
Solenoid Code
B
Solenoid
Single
Crossover
All Ports Blocked
Solenoid Energization Code
None
Surge Suppressor/Damper Code
None
Pressure [Max]
5075 psi
Port Restrictor Plugs
None
Spool Code
2
Valve Type
High-Performance
Port T Pressure Rating
150 psi
Electrical Options
None
Housing Code
W
Manual Override Option Code
None
Coil Rating Code
B
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Surge Suppressor/Damper
None
EN Code
None
Spool Spring Arrangement Code
A
Port T Code
2
Spool Shift Timing
N/A
Pilot Valve Type
N/A
Indicator Lights
No
Function
2-Position Spring Offset, End to End
Response Type
Standard Response
Coil Type Code
F
Spool Indicator Switch Code
S5
Reducer Module
N/A
Electrical Connector Code
None
Mechanical Options
None
Port Restrictor Plug Code
None
Pressure Port Check Valve Pressure
N/A
NFPA Size
D03
Voltage & Frequency
110/120 VAC – 50/60 Hz
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back