These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Spool Code
2
Operation
Solenoid Operated
EN Code
None
Valve Type
High-Performance
Solenoid Indicator Lights Code
L
Pressure [Max]
5075 psi
Housing Code
W
Reducer Module
N/A
Solenoid
Single
Manual Override Option Code
None
Electrical Connection
Wired Terminal Block
Coil Type Code
F
Solenoid Energization Code
None
Actuator Type
Solenoid
Function Code
2
Port T Code
2
Spool Spring Arrangement Code
A
NFPA Size
D03
Indicator Lights
Yes
Rated Flow [Max]
21 gal/min
Spool Shift Timing
N/A
Cycle Rate [Max]
N/A
Seal Material
Buna-N
Electrical Options
None
Design No.
60
Function
2-Position Spring Offset, End to End
Voltage & Frequency
110/120 VAC – 50/60 Hz
Response Type
Standard Response
Port Restrictor Plugs
None
Surge Suppressor/Damper
None
Port T Pressure Rating
150 psi
Center Position
All Ports Blocked
Mechanical Options
None
Pilot Valve Type
N/A
Port Restrictor Plug Code
None
AC/DC
AC
Spool Indicator Switch Code
S5
Crossover
All Ports Blocked
Solenoid Code
B
Coil Rating Code
B
Pilot/Drain
None
Electrical Connector Code
T
Surge Suppressor/Damper Code
None
Overrides
No Overrides
Pressure Port Check Valve Pressure
N/A
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back