Find a Service Center
Alternate Products
- 40 mm ID x 80 mm OD x 18 mm Wide
- Single Shield (Non-Contact)
- ABEC 1
- Steel Cage
- C3 Clearance
applications
- Textiles
- Power tools
- Electric motors
- Pumps
- Gearboxes
features
- Deep, uninterrupted raceway
- Carries axial loads in both directions
- Carries radial loads at high speeds
compliances
- 0
| O.D. Type | Cylindrical |
| Static Load Rating [Max] | 19000 lbf |
| Inner Ring Width | 0.71 in, 18 mm |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| O.D. | 3.15 in, 80 mm |
| Enclosure | Shield On One Side |
| Limiting Speed - Grease | 8500 rpm |
| Lubricant | Oil Preservative |
| Capacity | Standard Capacity |
| Rows of Balls | Single |
| Radial Internal Clearance | C3 |
| Locking Device | No Locking Device |
| Precision Level | Standard (ABEC 1) |
| Bearing Type | Deep Groove |
| No. in Set | Single Bearing |
| Precision | Standard |
| Origin | Single Row Radial |
| Seal Material | Tinplate |
| Series | 62 |
| icNumber | 7696377 |
| Bearing Design | Deep Groove Design |
| Bore Type | Cylindrical |
| Pre Lubricant | None |
| Inch/Metric | Metric |
| Snap Ring | No Snap Ring |
| Preload Level | None |
| Seal Type | Non-Contacting Seal |
| Cage Type | Metal |
| Cage Material | Bearing Steel |
| Material | Bearing Steel |
| I.D. | 1.57 in, 40 mm |
| Width | 0.71 in, 18 mm |
| Contact Angle | 0° |
| Outer Ring Width | 0.71 in, 18 mm |
| Ball Material | Steel |
| Weight | 0.82 LB |
| EAN or UPC | 7316576681110 |
