Find a Service Center
- 10 mm ID x 26 mm OD x 8 mm Wide
- Single Shield (Non-Contact)
- ABEC 1
- Plastic Cage
- Normal Clearance
applications
- Textiles
- Power tools
- Electric motors
- Pumps
- Gearboxes
features
- Deep, uninterrupted raceway
- Carries axial loads in both directions
- Carries radial loads at high speeds
compliances
- 0
| Snap Ring | No Snap Ring |
| Contact Angle | 0° |
| O.D. Type | Cylindrical |
| Outer Ring Width | 0.32 in, 8 mm |
| Precision Level | Standard (ABEC 1) |
| Inch/Metric | Metric |
| Material | Bearing Steel |
| Bearing Design | Deep Groove Design |
| Temperature Range [Max] | 176 °F |
| Radial Internal Clearance Specification | Normal Clearance |
| Lubricant | Grease |
| Cage Material | Polyamide |
| Locking Device | No Locking Device |
| Rows of Balls | Single |
| icNumber | 7696717 |
| Enclosure | Shield On One Side |
| Seal Material | Tinplate |
| Ball Material | Steel |
| Bearing Type | Deep Groove |
| Radial Internal Clearance | Normal |
| Special Features | Low Temperature Grease |
| Precision | Standard |
| Series | 60 |
| O.D. | 1.02 in, 26 mm |
| Capacity | Standard Capacity |
| Seal Type | Non-Contacting Seal |
| Cage Type | Plastic |
| Temperature Range [Min] | -58 °F |
| Width | 0.32 in, 8 mm |
| I.D. | 0.39 in, 10 mm |
| Preload Level | None |
| Bore Type | Cylindrical |
| No. in Set | Single Bearing |
| Inner Ring Width | 0.32 in, 8 mm |
| Weight | 0.044 LB |
| EAN or UPC | 7316570740974 |
