
- Ball Bearing Type
- Pillow Block
- 1 15/16 in Shaft Diameter
- 2 1/4 in Center Line To Base Dimension
- 6 in Minimum Bolt Hole Spacing Range
description
- Most widely used, normal-duty pillow block with high base-to-shaft centerline dimensions.
features
- Skwezloc® bearing-to-shaft locking system
- Patented, felt-lined flinger seal
- Unique metal land riding retainer
- Zone-hardened inner race
- Permanent metal nameplate
- Black oxide, corrosion-resistant race
- Differentiated lubrication and sealing system
- Superior shaft stability
- 52100 high quality bearing steel
- Exclusive locking pin and dimple system
- Extra wide outer race
- Extra wide inner race
- Solid base cast iron housing
Locking Device | Skwezloc Collar |
Bearing Design | Non-Expansion |
Series | NP Series |
Base Length | 8 1/8 in |
Center Line to Base Dimension [Min] | 2 1/4 in |
Grease | GoldPlex-HP |
Base Height | 3/4 in |
Insert Type | Steel Insert |
Lubrication | GoldPlex-HP |
Bolt Hole Spacing | 6 1/4 in |
Inch/Metric | Inch |
Bolt Size | 5/8 in |
Misalignment Range | ±2° |
Bearing Type | Ball Bearing |
Bolt Hole Spacing Range [Max] | 6 1/2 in |
Handle / Housing Material | Cast Iron |
Seal Flinger | No |
Bolt Hole Width | 11/16 in |
Roller Type | Ball |
Pre Lubricant | Lithium Complex |
Bolt Hole Spacing Range [Min] | 6 in |
Retainer Type | Metal Land Riding |
Special Features | Noise Tested, AC Housing Fit |
Pillow Block Type | Thru-Bolt |
Housing Material | Cast Iron |
Bolt Holes | 2 |
Brand. | Sealmaster |
Shaft Dia. | 1.9375 in |
Housing Construction | 1 Piece |
Lubricant | GoldPlex-HP |
Housing Base | Solid |
Base Width | 2 3/8 in |
Bearing Insert | 2-115TC ATO |
Mounted Unit Duty | Standard-Duty |
End Type | Open End |
Temperature Range [Max] | 200 °F |
Duty | Normal-Duty, Standard Air Handling-Duty |
Bolt Hole Length | 7/8 in |
Housing Height | 4 9/16 in |
Seal Type | Contact Seals |
Length Through Bore | 2.094 in |
Weight | 8.5 LB |
EAN or UPC | 662461210451 |
