Find a Service Center
Alternate Products
- Single Row Angular Contact Bearing, 12 mm ID x 32 mm OD x 10 mm Wide, Open, Standard Precision (ABEC 1), Nylon Cage, Normal Clearance (C0), 20° Contact Angle
description
- The angular contact light 7200WN series is dimensionally interchangeable with the radial 200 series.The features of the 7000WN series include a refined bore diameter. A single bearing is recommended for applications in which the thrust load is in one direction or, in the case of combined loads, the thrust load is high in relation to the radial load. A duplex pair is recommended for application where thrust ispresent in both directions or where axialdisplacement of the shaft must be restricted.For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Sizes 7201K through 7203WN have a 20° contact angle and a nylon cage. Sizes 7204WN through 7218WN have a 40° contact angle and a one-piece, ball piloted, pressed brass cage.Larger sizes 7219WN through 7230WN have a 40° contact angle and a one-piece, outer ring piloted high-strength machined bronze cage.
applications
- General industrial
- Agricultural
- Chemical
- Utilities
| Precision Level | Standard (ABEC 1) |
| Origin | Single Row Angular Contact |
| O.D. Type | Straight |
| Radial Internal Clearance | Normal |
| Width | 10.000 mm |
| Fillet Radius | 0.024 in |
| Inch/Metric | Metric Bore |
| Static Load Rating [Max] | 630 lbf |
| Locking Device | No Locking Device |
| Seal Type | Unsealed |
| O.D. | 32 mm |
| Snap Ring | No Snap Ring |
| Contact Angle | 20° |
| Cage Type | Plastic |
| Seal Material | None |
| Radial Internal Clearance Specification | Normal Clearance |
| Precision | Standard |
| Ball Material | Steel |
| Lubricant | Oil Preservative |
| Enclosure | Open |
| Outer Ring Width | 10 mm |
| Preload Level | None |
| Cage Material | Nylon |
| I.D. | 12 mm |
| Bearing Type | Angular Contact |
| icNumber | 7699198 |
| Capacity | Standard Capacity |
| Dynamic Load Rating | 1600 lbf |
| Rows of Balls | Single |
| Material | Steel |
| No. in Set | Single Bearing |
| Inner Ring Width | 10 mm |
| Bore Type | Round Bore |
| Weight | 0.08 LB |
| EAN or UPC | 637400594244 |
