Parker Valvair II Four-Way. Manifold Mounted valves have been trusted for years in applications requiring a heavy-duty, all-metal valve that will shift when called upon, even after being idle for an extended period of time. The solenoid/air pilot design of this valve uses line pressure to shift the spool. Single solenoid valves may be mounted in any position. Double solenoid valves should be mounted horizontally. Synthetic rubber o-ring seals are specially compounded for superior wear and abrasion resistance. Solenoids are encapsulated in epoxy for low power consumption and maximum life. These valves are very tolerant to contamination both inside and out. In dirty applications like foundries, steel mills, tire plants, aggregate plants and mines, they can be real problem solvers.
applications
Foundries
Steel mills
Tire plants
Aggregate plants
Mines
caution
All conveyor troughs should have some type of cover not only to keep material inside the trough and to protect material in the trough from outside elements, but also as a safety precaution.
Operating Pressure Range
35 psi to 140 psi
Series
Valvair II Series
Spool Description
N/A
Valve Body Style
Manifold Mounted
Valve Size
3/8 in
Valve Duty
Standard Duty
Port Size
3/8
Wiring Options
None
Return Type
Spring
Voltage Rating
24 VDC
Lights
Yes
Coil Style
Encapsulated
Operator
Solenoid w/Light & Locking Override
Basic Size
3/8 in
Installed Options
None
Cv Flow
4.8
Overrides
No Overrides
Valve Type
4-Way, 2 Position
Length
10.460 in
Height
8.740 in
Solenoid
Single
Operation
Electric
Actuator Type
Solenoid
Stations
N/A
Port Type
NPT
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
