Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 24" Stroke
- Steel Rails
- Composite Bearing w/Oversized Support Rods
- 2" Bore NFPA Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Stroke Tolerance | +0.030 in / -0.000 in |
| Slide Type | Thrust Slide |
| Port Location | Standard (Position 1) |
| Flow Controls | w/o Flow Controls |
| Cylinder Bore Size | 2 in |
| Port Type | NPTF |
| Cushions - Slide | No Cushions |
| Pressure [Max] | 150 psi |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Port Size | 3/8 |
| Slide Orientation | Right Hand (Standard) |
| Temperature Range [Min] | 0 °F |
| Base Wt. | 15.67 lb |
| Support Rod Material | Steel |
| Proximity Sensor | No Proximity Sensor |
| Intermediate Stroke | N/A |
| Support Rod Diameter | 30 mm |
| Temperature Range [Max] | 165 °F |
| Proximity Sensor Code | None |
| Positions | 2 Position |
| Series | HBT |
| Shock Absorbers - Slide | Shock Absorber w/Stroke Adjuster (Both Ends) |
| Cylinder Type | NFPA Pneumatic Cylinder |
| Bumpers - Slide | No Bumpers |
| Cylinder Seal Material | Buna-N |
| Slide Configuration Option Code | A |
| Weight per Inch | 0.83 lb |
| Stroke | 24 in |
| Bearing Type | Composite Bearing w/Oversized Support Rods |
| Weight | 35.59 LB |
