Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 2" Stroke
- Steel Rails
- Composite Bearing w/Oversized Support Rods
- 50 mm Bore ISO Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
| Port Location | Standard (Position 1) |
| Support Rod Diameter | 30 mm |
| Port Type | BSP |
| Shock Absorbers - Slide | No Shock Absorber |
| Proximity Sensor Code | None |
| Slide Type | Thrust Slide |
| Series | HBT |
| Port Size | 3/8 |
| Positions | 2 Position |
| Intermediate Stroke | N/A |
| Flow Controls | w/o Flow Controls |
| Slide Orientation | Right Hand (Standard) |
| Weight per Inch | 0.83 lb |
| Proximity Sensor | No Proximity Sensor |
| Base Wt. | 15.67 lb |
| Bumpers - Slide | Bumpers w/Adjustable Stop Collar (Both Ends) |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Pressure [Max] | 150 psi |
| Slide Configuration Option Code | B4 |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Cylinder Type | ISO Pneumatic Cylinder |
| Cushions - Slide | No Cushions |
| Temperature Range [Max] | 165 °F |
| Cylinder Seal Material | Buna-N |
| Stroke | 2 in |
| Cylinder Bore Size | 50 mm |
| Support Rod Material | Steel |
| Bearing Type | Composite Bearing w/Oversized Support Rods |
| Temperature Range [Min] | 0 °F |
| Weight | 17.33 LB |
