Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 4" Stroke
- Steel Rails
- Composite Bearing
- 1 1/2" Bore NFPA Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
| Cylinder Bore Size | 1.5 in |
| Weight per Inch | 0.48 lb |
| Temperature Range [Min] | 0 °F |
| Intermediate Stroke | N/A |
| Series | HBT |
| Cylinder Type | NFPA Pneumatic Cylinder |
| Support Rod Material | Steel |
| Flow Controls | w/o Flow Controls |
| Shock Absorbers - Slide | Shock Absorber w/Stroke Adjuster (Both Ends) |
| Stroke | 4 in |
| Positions | 2 Position |
| Slide Configuration Option Code | A, C |
| Port Location | Standard (Position 1) |
| Cylinder Seal Material | Buna-N |
| Port Type | NPTF |
| Slide Orientation | Right Hand (Standard) |
| Slide Type | Thrust Slide |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Temperature Range [Max] | 165 °F |
| Support Rod Diameter | 20 mm |
| Bearing Type | Composite Bearing |
| Pressure [Max] | 150 psi |
| Base Wt. | 8.86 lb |
| Port Size | 1/4 |
| Cushions - Slide | Cushioned (Both Ends) |
| Proximity Sensor | No Proximity Sensor |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Proximity Sensor Code | None |
| Bumpers - Slide | No Bumpers |
| Weight | 10.78 LB |
