6320

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100761713

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Material	Steel
Locking Device	No Locking Device
Radial Internal Clearance	Normal
Limiting Speed - Grease	2800 rpm
Outer Ring Width	47 mm
Cage Material	Pressed Steel
Corner Radius [Min]	3.00 mm
Contact Angle	0°
icNumber	7696397
Bearing Type	Radial
O.D. Type	Straight
Radial Internal Clearance Specification	Normal Clearance
Seal Type	Unsealed
O.D.	215.0000 mm
Cage Type	Metal
Dynamic Load Rating	38,906.00 lbf
No. in Set	Single Bearing
Precision	Standard
Static Load Rating [Max]	31,800.00 lbf
Rows of Balls	Single
Limiting Speed - Oil	3400 rpm
Precision Level	Standard (ABEC 1)
Capacity	Standard Capacity
Ball Material	Steel
Lubricant	Oil Preservative
Width	47 mm
Bore Type	Round Bore
Enclosure	Open
I.D.	100 mm
Snap Ring	No Snap Ring
Inch/Metric	Metric Bore
Preload Level	None
Seal Material	None
Inner Ring Width	47 mm
Weight	15.335 LB
EAN or UPC	29176017841