6319DDUC3

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100761695

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Static Load Rating [Max]	26,700.00 lbf
Seal Type	Contact Seals
I.D.	95 mm
Radial Internal Clearance Specification	Greater Than Normal Clearance
Capacity	Standard Capacity
Dynamic Load Rating	36,116.00 lbf
No. in Set	Single Bearing
Radial Internal Clearance	C3
Contact Angle	0°
Limiting Speed - Oil	3600 rpm
Precision Level	Standard (ABEC 1)
Cage Material	Pressed Steel
Corner Radius [Min]	3.00 mm
Precision	Standard
Ball Material	Steel
Bore Type	Round Bore
Snap Ring	No Snap Ring
Lubricant	Mul-Temp SRL
Outer Ring Width	45 mm
Width	45 mm
Inner Ring Width	45 mm
Bearing Type	Radial
Seal Material	Rubber
Preload Level	None
Inch/Metric	Metric Bore
Locking Device	No Locking Device
Cage Type	Metal
Enclosure	Double Sealed
O.D. Type	Straight
Rows of Balls	Single
O.D.	200.0000 mm
Material	Steel
Limiting Speed - Grease	2400 rpm
Weight	12.83 LB
EAN or UPC	29176066115