6308DDUC3

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100761236

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Lubricant	Mul-Temp SRL
Outer Ring Width	23 mm
Dynamic Load Rating	9,560.00 lbf
Bore Type	Round Bore
Cage Material	Pressed Steel
Corner Radius [Min]	1.50 mm
Inner Ring Width	23 mm
Cage Type	Metal
Radial Internal Clearance	C3
Limiting Speed - Oil	9000 rpm
Inch/Metric	Metric Bore
Precision Level	Standard (ABEC 1)
Seal Type	Contact Seals
Static Load Rating [Max]	5,400.00 lbf
Rows of Balls	Single
Capacity	Standard Capacity
Limiting Speed - Grease	5300 rpm
Precision	Standard
Radial Internal Clearance Specification	Greater Than Normal Clearance
Snap Ring	No Snap Ring
O.D. Type	Straight
No. in Set	Single Bearing
Contact Angle	0°
icNumber	7695880
O.D.	90.0000 mm
Ball Material	Steel
Width	23 mm
Bearing Type	Radial
Preload Level	None
Enclosure	Double Sealed
Locking Device	No Locking Device
I.D.	40 mm
Seal Material	Buna-N
Material	Steel
Weight	1.418 LB
EAN or UPC	29176065682